EcoSave – Water Saving, Eco Friendly Water Softener
This series of volume-controlled Counter Current Water Softening plants are selected specifically for reliable and economical operation. The advantage of using volume controlled plants is that the resins are used to their full capacity before an automatic regeneration takes place. The systems are designed as fully automatic duty and standby units providing 100% duty 24 hours per day. The advantage of operating the softener units Counter Current, service and regeneration flows in opposing directions is that salt usage is minimised, water quality can be maintained between regenerations and water consumption can be reduced by up to 80% when compared with a conventional water softener.
Plant configuration can be flexible to suit the plant area available and the plant is controlled via an on board PLC where all plant functions can be monitored.
Conductivity sensing during regeneration. By installing a conductivity meter to monitor the rinse stages water wastage can be reduced by 25-35 %. The conductivity meter will measure the rinse water quality and will halt the rinse cycle when the conductivity meter reads a pre set value, normally set at worst case inlet water quality.
Hardness Monitoring – To measure the quality of the soft water a Testomat can be installed. This can be set to trigger and alarm if the water hardness increases above a pre set value. In addition the read out on the monitor will indicate the hardness of the water in the display of the control panel.
Click here for technical information