|Car washing||Chemical industry|
|District heating plants||Laboratories|
|Process water||Boiler water and steam production|
|Food industry||Pharmaceutical industry|
These reverse osmosis plants are primarily used where reduction of the salt content of the water is of significance.
Easy to place where space is limited
Ready-assembled panel with built in PLC
Simple electrical and plumbing installations.
The RO-2100 range includes PLC with LCD operator control panel as standard.
It has an easy to use operator panel with LCD data display for read out of conductivity and other operating parameters.
PLC control enables a number of options: logon to BUS systems, reprogramming of PLC control to customise conditions etc.
|Capacity,litres / hour||600||1200||1700||2300|
|Maximum recovery, %*||75||75||75||75|
|Salt rejection, %*||>98||>98||>98||>98|
|Typical water quality, µS/cm*||<20||<20||<20||<20|
|Electrical supply, V/Hz||3×400/50||3×400/50||3×400/50||3×400/50|
|Power consumption, kW**||2.2||2.2||4||4|
|Inlet pipe diameter, (“)||3/4||3/4||3/4||3/4|
|Concentrate outlet diameter, (“)||3/4||3/4||3/4||3/4|
|Permeate outlet diameter, (“)||3/4||3/4||3/4||3/4|
|Feed water pressure, min/max, bar||3/7||3/7||3/7||3/7|
|Dimensions, L x W x H, mm||755 x 750 x 1620||755 x 750 x 1620||755 x 750 x 1620||755 x 750 x 1620|
|Maximum water temp ºC||25||25||25||25|
*Nominal, based on a potable feed water supply with a maximum total dissolved solids level of 500 mg/l, a minimum temperature of 10ºC and a 3 bar inlet pressure.
** Without CIP-unit